ORPHE INSOLE向けWeb Bluetooth SDK
ORPHE-INSOLE.js
Build browser prototypes with ORPHE INSOLE pressure, motion, and orientation data. ORPHE INSOLEをWeb Bluetooth経由で扱い、足裏圧とモーションを使ったWebアプリを作れます。
ORPHE INSOLEとは?
Smart insole data, ready for web prototypes.
ORPHE INSOLEは、圧力センサーとIMUで足の動きをリアルタイムに計測するスマートインソールです。ORPHE-INSOLE.jsは、そのストリームをWeb Bluetooth経由でブラウザアプリへ接続します。
Foot pressure and motion in one stream
Use pressure values together with converted acceleration and gyroscope values for gait, balance, sports, and rehabilitation experiments.
No native app setup for early tests
Open the examples in Chrome or Edge, connect with Web Bluetooth, and start inspecting live packets.
Compatible with existing ORPHE style APIs
Use new Orphe(...) or the clearer new OrpheInsole(...) alias while keeping familiar callbacks.
公式製品情報
A pressure and motion platform inside the insole.
ORPHE INSOLEの公式ページでは、通常の中敷きと交換して使えるスマートインソールとして、足裏圧と足の動きをリアルタイムに計測し、アプリや外部機器と連携してスマートシューズ化できる製品として紹介されています。
Each foot includes six pressure sensors plus 3-axis acceleration and 3-axis gyroscope data.
Store-listed ranges for acceleration, gyroscope, and pressure measurement.
Sampling rate may vary depending on the application and mode.
The store lists magnetic connector charging and wireless charging with a separately sold ORPHE MAT.
US Men's sizes 3.5 to 9.5 are listed, with 7.5 marked unavailable and more sizes planned.
The evaluation kit page mentions TestFlight app distribution, raw data recording, and open-source Python and JavaScript libraries.
公式ストアでは現在、ORPHE INSOLE βは承認済み顧客・研究パートナー向けのEvaluation Kitとして掲載され、3ペアのインソールとiOSアプリを含むと説明されています。
何のデータが取れる?
Pressure, motion, and orientation callbacks for browser apps.
ライブラリがINSOLE SENSOR_VALUES packetをパースし、UI、ゲーム、可視化、データロギングでそのまま使えるコールバックへ値を渡します。
Pressure values
Receive foot pressure samples and packet metadata for balance, loading, and contact timing.
Acceleration
Use converted XYZ acceleration values for movement intensity, step timing, and interaction design.
Angular velocity
Track rotational motion from the foot-mounted sensor without writing your own BLE parser.
Quaternion
In default mode 4, receive orientation values together with pressure and motion data.
Coordinate system and pressure sensor placement
The sensor frame is right-handed and Z-up: Y points toward the toes, X to the right of the toe direction, and Z upward out of the insole top surface (accZ reads about +1 G at rest). Six pressure sensors per foot are numbered 1–6 as shown; press.values[i] corresponds to sensor i + 1.
受賞とユースケース
Designed for real movement data, from sports to safety research.
PR TIMESでは、ORPHE INSOLEがCES 2026 Best of Innovationを受賞したこと、スポーツ・フィットネス、バイオメカニクスやAI研究用データセット、産業・労働安全での活用が紹介されています。このSDKページでは、rawな足裏圧・モーションストリームをブラウザで確認し、プロトタイプ化する層に絞って説明しています。
クイックスタート
Connect one ORPHE INSOLE and print pressure data.
CDN buildを読み込み、OrpheInsole インスタンスを作成し、setup() と begin() でデフォルトのストリーミングを開始します。
| Mode | Data stream |
|---|---|
4 |
Gyro, acceleration, pressure, quaternion. Default for begin(). |
3 |
Gyro, acceleration, pressure. Use begin({ streamingMode: 3 }). |
1 |
Legacy real-time sensor values for compatibility tests. |
詳細リファレンス: センサ・パケット仕様 / トラブルシューティング / 圧力データレシピ集。
<button onclick="connectInsole()">Connect ORPHE INSOLE</button>
<pre id="sensor-data"></pre>
<script src="https://cdn.jsdelivr.net/gh/Orphe-OSS/ORPHE-INSOLE.js@v1.4.0/dist/orphe-insole.min.js"></script>
<script>
const insole = new OrpheInsole(0);
window.onload = () => {
insole.setup();
insole.gotPress = (press) => {
document.getElementById("sensor-data").textContent =
JSON.stringify(press, null, 2);
};
insole.gotConvertedAcc = (acc) => console.log("acc", acc);
insole.gotConvertedGyro = (gyro) => console.log("gyro", gyro);
insole.gotQuat = (quat) => console.log("quat", quat);
};
async function connectInsole() {
// Default streamingMode is 4.
await insole.begin();
}
</script>
開発を始める
Choose the entry point that matches your test.
ライブ確認にはDashboard、raw packet確認にはTerminal、自分のアプリへ組み込む段階ではAPI referenceを使います。
Showcase
Product specs, 6ch pressure heatmap, IMU charts, quaternion 3D view, CSV recording, and code snippets. Works without a device (demo playback).
Exhibition Display
An overview page for exhibitions: see every sensor value at a glance on a 16:9 display. Foot pressure map, total pressure gauge, IMU charts, 3D attitude with Euler traces, and Step Analysis — all on one screen, no scrolling. Runs on demo data until a device connects.
Step Analysis + RAW Data
Visualize left and right gait results one step at a time, with last-10-step trends and realtime raw sensor charts.
Gait Report
Record 20 steps per foot from Step Analysis and build a live-updating gait report with mean ± SD, left/right asymmetry, variability, and foot-strike breakdown.
VISUALIZE
The recommended starting point: pressure, acceleration, and gyro charts for up to two insoles with throttled 30fps rendering.
Calibrated Pressure
A minimal sample that charts all six pressure channels as load in newtons, using the calibration values read from each insole on connect.
FIFO Guide
Start here for FIFO: how it differs from Realtime, why the device buffer holds about 30 seconds, and how to read serial continuity and missing ranges before exporting CSV.
Sensor Dashboard
Connect one or two ORPHE INSOLE devices and inspect pressure, motion, quaternion, and left/right assignment.
Balance Sway
Center-of-pressure trajectory, sway metrics, and left/right weight bearing with a built-in demo stream. Not a medical device.
Balance Tuner
Turn estimated load center and left/right balance into pitch, pan, consonance, and controlled dissonance.
Hula Motion Sonifier
Detect hula steps from combined pressure and IMU signals and turn state changes into sound.
Music Shoe
Hold the insole in your hand and play it: orientation-gated hits, loop station, and a gesture-recording lab. Playable with mouse/keyboard too.
UDON
Knead udon dough by stepping in place: a two-stage detector (foot lift from the IMU, stomp from 6ch pressure) rates every step for strength, left/right balance, and pace. Thresholds are relative to an auto-tracking baseline, so no calibration is needed. Runs on demo data until a device connects.
Terminal
Read and write BLE characteristics, watch raw SENSOR_VALUES bytes, and export captured values.
DEMO App
Measure on iPhone, capture ARKit pose estimation, and export raw IMU + pressure CSV with gait indicators. Distributed via TestFlight to Evaluation Kit customers.
API Documentation
Browse generated JSDoc for the ORPHE INSOLE class, callbacks, BLE methods, and parser helpers.
作れるもの
Prototype around the use cases ORPHE INSOLE is built for.
製品ストーリーの中心は、足裏圧の可視化、動作分析、スマートシューズアプリケーション、研究グレードのデータ収集です。ORPHE-INSOLE.jsは、それらの信号をWeb開発者が直接試せる入口を提供します。
Pressure and posture feedback
Inspect pressure and foot-motion changes for running, training, coaching tools, and performance experiments.
Biomechanics datasets
Record synchronized pressure and motion streams for validation, exploratory analysis, and AI dataset creation.
Work-safety inspection
Explore fall, slip, trip, and fatigue-related motion signals before connecting them to larger safety systems.
Device inspection
Build dashboards for device state, packet health, left/right assignment, and data stream debugging.
Beta notice
ORPHE-INSOLE.js is currently provided as a beta library.
Documentation and tutorials are still being improved. Web Bluetooth requires Chrome or Edge (desktop / Android) — Safari and Firefox, including all iOS browsers, are not supported.
利用方針
Free for education, research, prototypes, and non-commercial apps. Commercial use requires a separate agreement.
現在のORPHE-CORE.jsの方針に従い、ORPHE-INSOLE.jsは教育・ワークショップ、大学・研究機関などでの非商用研究、個人制作、試作・社内検証、ORPHE INSOLEを使った無償アプリ・非商用サービスについて、改変を含めて無償で利用できる方針です。
Free use
Education/workshops, academic non-commercial research, personal creative projects, prototypes/internal experiments, and free non-commercial services are allowed.
Commercial use
Paid apps, paid services, commercial SDK integrations, commissioned products, or business services require a separate commercial agreement with ORPHE.
Version scope
This page follows the ORPHE-CORE.js v1.4.0 and later policy. ORPHE-INSOLE.js v1.0.0 and later should use the same usage policy for this repository.
Copyright and licensing
Copyright (C) 2025, Tetsuaki BABA and ORPHE Inc. See the usage policy for allowed uses and commercial agreement requirements.